Connecting To The Managed System Through The Local Serial Port Or Telnet Management Station (Client System) - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

You can change the SSH port with the command:
racadm config -g cfgRacTuning -o cfgRacTuneSshPort 0x <port number>
For more information on cfgSerialSshEnable and cfgRacTuneSshPort objects,
see "DRAC 4 Property Database Group and Object Definitions."
The DRAC 4 SSH implementation supports multiple cryptography schemes:
• Asymmetric Cryptography:
– Diffie-Hellman DSA/DSS 512-1024 (random) bits per NIST specification
• Symmetric Cryptography:
– AES256-CBC
– RIJNDAEL256-CBC
– AES192-CBC
– RIJNDAEL192-CBC
– AES128-CBC
– RIJNDAEL128-CBC
– BLOWFISH-128-CBC
– 3DES-192-CBC
– ARCFOUR-128
• Message Integrity:
– HMAC-SHA1-160
– HMAC-SHA1-96
– HMAC-MD5-128
– HMAC-MD5-96
• Authentication:
– Password
– SSHv2 (SSHv1 is not supported)
Connecting to the Managed System Through the Local Serial
Port or Telnet Management Station (Client System)
The managed system provides access between the DRAC 4 and the serial port on your system to
enable you to power on, power off, or reset the managed system, and access logs.
The serial console is available on the DRAC 4 through the managed system external serial
connector. Only one serial client system (management station) may be active at any given time.
Configuring the DRAC 4 to Use a Serial or Telnet Text Console
51