Dell Remote Access Controller 4 Firmware Version 1.30 User Manual page 120

CD/DVD Device or Image File
-c < device-name > | < image-file >
This parameter specifies the device or file to supply the virtual CD/DVD-ROM media:
• < image-file > is the filename (including path) of a valid ISO-9660 image file
Example:
Windows operating system: -c c:\temp\mydvd.img
Linux operating system: -c /tmp/mydvd.img
• < device-name > on Windows systems: a valid CD/DVD drive letter
< device-name > on Linux systems: a valid CD/DVD device special filename
Example:
Windows operating system: -c d:\
Linux operating system: -c /dev/cdrom
Omit this parameter from the command line if no CD/DVD media is to be virtualized.
If an invalid value is detected, an error message is listed and the command terminates.
Version Display Switch
-v
This parameter is used to display the version of the VM-CLI utility.
If no other nonswitch options are provided, the command terminates without error.
Help Display Switch
-h
This parameter is used to display a summary of the VM-CLI utility parameters.
If no other nonswitch options are provided, the command terminates without error.
NOTE:
options are provided. Otherwise, an error message displays and the command terminates with an error.
120
Configuring and Using Virtual Media
Specify at least one media type (floppy/disk or CD/DVD) with the command, unless only switch