Cfgserialconsolenoauth (Read/Write); Cfgserialconsolecommand (Read/Write); Cfgserialhistorysize (Read/Write) - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

cfgSerialConsoleNoAuth (Read/Write)

NOTE:
Legal Values
0 – Login prompt is Enabled on the serial shell.
1 – Login prompt is Disabled on serial shell.
Default
0
Description
Allows you to disable authentication on the serial shell.

cfgSerialConsoleCommand (Read/Write)

NOTE:
Description
The serial command runs after login at the start of a session and allows you to set up a
command such as connect com2 that autoruns when a session begins.
Default
Empty string (no command).
Example
connect com2

cfgSerialHistorySize (Read/Write)

NOTE:
Legal Values
Any integer less than or equal to 8192. (If a value larger than 8192 is supplied, no error is
returned and the history size is set to 8192.)
Default
8192 characters
Description
Sets the size of the serial history buffer.
202
DRAC 4 Property Database Group and Object Definitions
To modify this property, you must have Configure DRAC 4 permission.
To modify this property, you must have Configure DRAC 4 permission.
To modify this property, you must have Configure DRAC 4 permission.