Help; Synopsis; Description; Output - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

racadm Subcommand Man Pages
This section provides descriptions of the subcommands that you can run in the racadm CLI.

help

NOTE:
To use this command, you must have Log In DRAC 4 permission.
Table A-1 describes the help command.
Table A-1. Help Command
Command
help

Synopsis

racadm help
racadm help < subcommand >

Description

The help subcommand lists all of the subcommands that are available under the racadm
command along with a one-line description. You may also type a subcommand after help to get
the syntax for a specific subcommand.

Output

The racadm help command displays a complete list of subcommands.
The racadm help <subcommand> command displays information for the specified
subcommand only.
Definition
Lists all of the subcommands available to use with
racadm and provides a short description for each.
racadm Subcommand Man Pages
149