Related Manuals for Draytek Vigor 2600 VGST
Summary of Contents for Draytek Vigor 2600 VGST
- Page 1 Notes Installation of DSL Connection and DSL router DrayTek Vigor 2600 VGST Further information available: Self-Installation Guide at www.t-com.sk ■ © August 2006, Slovak Telekom, a. s. > Self-Installation Guide...
- Page 2 DSL access to the Internet using a standard telephone line or an ISDN Installation of DSL router DrayTek Vigor 2600 VGST line. The installation is very easy – you can do it yourself by following the enclosed procedures and Testing the Correct Connection diagrams.
-
Page 3: Installation Package Contents
3. There should not be an alarm (security device) connected to your telephone line. You can install your DSL Connection and DSL router DrayTek Vigor 2600 VGST using the Switch the alarm off before the installation; enclosed manual or the installation CD Internet. If you chose the latter, insert the enclosed CD otherwise the alarm may become to your computer’s drive. - Page 4 4. Use the other cable (with connectors of port labelled PHONE. different sizes), to connect DSL router DrayTek Vigor 2600 VGST with the splitter. Plug the bigger connector of the cable into the larger port on the back of the DSL router labelled ADSL;...
- Page 5 1. manufacturer label (Siemens, Alcatel, Aethra) 2. line-in jack with a line cable (not fixed) 3. two ISDN-out jacks (side by side) 4. 230 V connector DSL router Your telephone set DrayTek Vigor 2600 VGST > Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST...
- Page 6 DSL router below: DrayTek Vigor 2600 VGST with the splitter. Plug the bigger connector of the cable into 1. Pull out the cable from the socket and plug it the larger port on the back of the DSL router into the splitter port labelled PHONE.
- Page 7 Reporting Centre 12129. Legend to an unsuitable NT: 1. power cord 2. cable – line-in jack (fixed) DSL router 3. ISDN-out jack DrayTek Vigor 2600 VGST Your ISDN telephone set > Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST...
- Page 8 Slovensko at 0850 111 300 or our Technical 9. Click on “OK“. 3. Now, your DSL router Vigor 2600 VGST is Support Centre at 0900 211 111. on and ready for selected configuration over any PC in your network; you can verify 1.
- Page 9 PPPoE/PPPoA and the site PPPoE/ DSL router setup: PPPoA in client mode will be displayed: VPI : 1 ■ VCI : 32 ■ Typ zapuzdrenia: LLC/SNAP ■ Protokol: PPPoE ■ Modulácia: G.DMT ■ > Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST...
- Page 10 Technical Support Centre at 0900 211 111, or the Technical Support Centre of the DSL router supplier at 02/44 64 18 32. > Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST > DSL router DrayTek Vigor 2600 VGST...