Lightware MMX2-4x3-H20 User Manual page 30

   
4. Device Concept
4.14. Further Built-in Features
4.14.1. Device Cloning – Configuration Backup and Restore
The device (configuration) cloning of MMX2 series switcher is a simple method that eliminates the need to
repeatedly configure certain devices to have identical (non-factory) settings. If the devices are installed in
the same type of system multiple times, then it is enough to set up only one device to fit the user's needs and
then copy those settings to the others, thus saving time and resources.
Cloning is possible between devices using the same firmware version. All LW3 settings, WelcomeScreen
Image and UserScript will be saved.

UserScripts are only available with up to firmware version v1.4.4. From firmware version
DIFFERENCE:
v1.5.0, LARA replaces functions previously managed by UserScripts.
Please note that the clone file can be downloaded and uploaded via HTTP or HTTPS, so 80 or 433 port has
to be enabled.
See more information about the settings in the
Clone configuration
section.
Applied firmware package: v2.9.0b6 | LDC software: v2.7.6b4
MMX2 series – User's Manual 30