Lightware MMX2-4x3-H20 User Manual page 105

    7. LW3 Programmers' Reference
7.8.4. Emulating an EDID to an Input Port
Command and Response
ç CALL·/V1/EDID:switch(<source>:<destination>)
æ mO·/V1/EDID:switch
Parameters
Parameter Parameter description
<source> Source EDID memory place
<destination> The emulated EDID memory of the desired input port
Example
ç CALL /V1/EDID:switch(F49:E2)
æ mO /V1/EDID:switch
7.8.5. Emulating an EDID to All Input Ports
Command and Response
ç CALL·/V1/EDID:switchAll(<source>)
æ mO·/V1/EDID:switchAll
Parameters
Parameter Parameter description
<source> Source EDID memory place
Example
ç CALL /V1/EDID:switchAll(F47)
æ mO /V1/EDID:switchAll
MMX2 series – User's Manual
7.8.6. Copying an EDID to User Memory
Command and Response
Parameters
Values Value description
F1-F120 Factory EDIDs
U1-U14 User EDIDs
D1-D2 Dynamic EDIDs
U1-U14 User EDIDs
Example
7.8.7. Deleting an EDID from User Memory
Command and Response
Parameters
Values Value description
F1-F148 Factory EDIDs
U1-U100 User EDIDs
Example
Dynamic EDIDs
D1-D2
Applied firmware package: v2.9.0b6 | LDC software: v2.7.6b4
ç CALL·/V1/EDID:copy(<source>:<destination>)
æ mO·/V1/EDID:copy
Parameter Parameter description
<source> Source EDID memory place
<destination> The emulated EDID memory of the desired input port
ç CALL /V1/EDID:copy(F1:U2)
æ mO /V1/EDID:copy
ç CALL·/V1/EDID:delete(<user_edid>)
æ mO·/V1/EDID:delete
Parameter Parameter description
<user_edid> The emulated EDID memory of the desired input port.
ç CALL /V1/EDID:delete(U2)
æ mO /V1/EDID:delete
105
Values Value description
F1-F148 Factory EDIDs
U1-U100 User EDIDs
D1-D2 Dynamic EDIDs
U1-U100 User EDIDs
Values Value description
User EDIDs
U1-U14