Lightware MMX2-4x3-H20 User Manual page 142

   
11. Appendix
v1.6.2b2
Release date: 2022-12-08
Bugfix:
▪
Client OS no longer detects the disabled ethernet connection on USB-C port as an active network.
▪
Port Power Role settings are preserved in case of overcurrent or when disconnecting the USB-C cable.
Known issue:
▪ Soft reboot of the Taurus / MMX2 takes longer by 2 minutes than usual. Hard reboot (e.g. a power
cycle) is faster than the soft one
v1.6.1b2
Release date: 2022-11-10
New feature:
▪ Advanced Ethernet configuration supports separate User/Control LANs and dedicated ports for BYOD
devices.
▪ Basic authentication flow improvement
Optimized log message flow
▪
Bugfix:
▪
In overcurrent condition notebook charging is disabled only, all other functions are maintained.
Known issue:
▪ Soft reboot of the Taurus / MMX2 takes longer by 2 minutes than usual. Hard reboot (e.g. a power
cycle) is faster than the soft one
v1.6.0b3
Release date: 2022-10-27
New feature:
Advanced Ethernet configuration supports separate User/Control LANs and dedicated ports for BYOD
▪
devices.
▪ Optimized log message flow
Bugfix:
▪
In overcurrent condition notebook charging is disabled only, all other functions are maintained.
Known issue:
▪ Soft reboot of the Taurus / MMX2 takes longer by 2 minutes than usual. Hard reboot (e.g. a power
cycle) is faster than the soft one
MMX2 series – User's Manual
v1.5.1b2
Release date: 2022-09-15
Bugfix:
▪
Known issue:
▪
v1.5.0b7
Release date: 2022-08-31
New feature:
▪
▪
▪
▪
Known issue:
▪
v1.4.4b2
Release date: 2022-08-16
Bugfix:
▪
v1.4.3b1
Release date: 2022-07-20
Bugfix:
▪
Applied firmware package: v2.9.0b6 | LDC software: v2.7.6b4
LARA v1.1.1. has been integrated into Taurus v1.5.1. For more information please visit: https://
go.lightware.com/lara-release-note-v1.1.1
Soft reboot of the Taurus / MMX2 takes longer by 2 minutes than usual. Hard reboot (e.g. a power
cycle) is faster than the soft one
UserScripts can not be used from Firmware version 1.5.0, use LARA (Lightware Advanced Room
Automation) configurations instead LARA v1.1.0. has been integrated into Taurus v1.5.0 For more
information please visit: https://go.lightware.com/lara-release-note-v1.1.0b28
Packages for Taurus UCX and Taurus MMX2 are separated from Firmware version 1.5.0. Please
download the specific firmware package for your product.
Device label will not be overwritten when cloning configuration. Please ignore the warning in LDC /
Bulk Management
Stability improvements have been added
Soft reboot of the Taurus / MMX2 takes longer by 2 minutes than usual. Hard reboot (e.g. a power
cycle) is faster than the soft one.
Risk of USB crosspoint disconnect when USB host wakes up from sleep or from power off - Firmware
1.4.4 fixes this issue.
Risk of "bootloop" after initial flashing -> fixed
142