Integrated Devices Screen - Dell PowerEdge R410 Hardware Owner's Manual

Integrated Devices Screen

Option
Integrated SAS/RAID
Controller
(Enabled default)
User Accessible USB
Ports
(All Ports On default)
Internal USB Port
(On default)
Embedded NIC1 and
NIC2
Embedded Gb NICx
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
MAC Address
Capability Detected
OS Watchdog Timer
(Disabled default)
I/OAT DMA Engine
(Disabled default)
Embedded Video
Controller
(Enabled default)
64
Using the System Setup Program and UEFI Boot Manager
Description
Enables or disables the integrated storage controller.
Enables or disables the user-accessible USB ports. Options
are All Ports On, Only Back Ports On, and All Ports Off.
Enables or disables the internal USB port.
Enables or disables the OS interface of the four embedded
NICs. (The NICs may also be accessed through the
system's management controller.)
Enables or disables the embedded NICs. Options are
Enabled, Enabled with PXE, and Enabled with iSCSI
Boot. PXE support allows the system to boot from the
network.
Displays the MAC address for the NIC.
Displays the features of the NIC hardware key, if installed.
NOTE:
Some NIC features may require the installation of an
additional driver.
Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding. When
Enabled, the operating system is allowed to initialize the
timer. When Disabled, the timer is not initialized.
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b specification.
Enables or disables the I/O acceleration technology
(I/OAT). This feature should only be enabled if the
hardware and software support I/OAT.
Displays the total amount of video memory available in
the embedded video controller.