System Utilities Screen; System And Setup Password Features - Dell PowerEdge R410 Hardware Owner's Manual

System Utilities Screen

Option
System Setup
System Services (USC)
BIOS Boot Manager
Reboot System

System and Setup Password Features

NOTE:
For a forgotten password, see "Disabling a Forgotten Password" on
page 172.
Your system is shipped without the system password feature enabled in BIOS. The
password features provide a basic level of security for the data on your system.
CAUTION:
Anyone can access the data stored on your system if the system is
running and unattended.
Using the System Password
When a system password is assigned, the system prompts for the system
password after the system starts and only those with the password have full
use of the system.
Assigning a System Password
Before assigning a system password, enter the System Setup program and
check the System Password option.
When a system password is assigned, System Password is Enabled.
If Password Status is Unlocked, you can change the system password.
If Locked, you cannot change the system password. Disabling the password
jumper on the system board sets System Password to Disabled, and you
cannot change or enter a new system password.
Description
Accesses the System Setup program without rebooting.
Restarts the system and accesses the Unified Server
Configurator, which enables you to run utilities such as
system diagnostics.
Accesses the BIOS-level boot options list without
rebooting. This option enables you to conveniently
switch to BIOS boot mode if you need to boot to a
device with a non-UEFI operating system, such as a
bootable DOS media with diagnostics software.
Restarts the system.
Using the System Setup Program and UEFI Boot Manager
71