Integrated Devices Screen - Dell PowerEdge M830 Owner's Manual

Menu Item
PXE Device n (n = 1 to 4)
PXE Device n Settings (n = 1
to 4)

Integrated Devices screen

Integrated Devices screen allows you to view and configure the settings of all integrated devices
including the video controller, integrated RAID controller, and the USB ports.
In the System Setup Main Menu, click System BIOS → Integrated Devices.
Menu Item
USB 3.0 Setting
User Accessible USB Ports
Internal USB Port
Integrated RAID Controller
Integrated Network Card 1
I/OAT DMA Engine
Embedded Video Controller Allows you to enable or disable the Embedded Video Controller. By
SR-IOV Global Enable
OS Watchdog Timer
Description
Enables or disables the device. When enabled, a UEFI boot option is
created for the device.
Allows you to control the configuration of the PXE device.
Description
Allows you to enable or disable the USB 3.0 support Enable this option
only if your operating system support USB 3.0. Disabling this allows
devices to operate at USB 2.0 speed. USB 3.0 is disabled by default
Allows you to enable or disable the USB ports. Selecting Only Back Ports
On disables the front USB ports, selecting All Ports Off disables all USB
ports. The USB keyboard and mouse operates during boot process in
certain operating systems. After the boot process is complete, the USB
keyboard and mouse does not work if the ports are disabled.
NOTE: Selecting Only Back Ports On and All Ports Off will disable
the USB management port and also restrict access to iDRAC
features.
Allows you to enable or disable the internal USB port.
Allows you to enable or disable the integrated RAID controller.
NOTE: This feature is not supported for the PowerEdge T630
system.
Allows you to enable or disable the integrated network card.
Allows you to enable or disable the I/OAT option Enable only if the
hardware and software supports the feature.
default, the embedded video controller is Enabled. Current state of
Embedded Video Controller is Enabled. Current State of Embedded
Video Controller is a read only field, indicating the current state for the
Embedded Video Controller. If the Embedded Video Controller is the
only display capability in the system (that is, no add-in graphics card is
installed), then the Embedded Video Controller is automatically used as
the primary display even if the Embedded Video Controller setting is
Disabled.
Allows you to enable or disable the BIOS configuration of Single Root I/O
Virtualization (SR-IOV) devices. By default, the SR-IOV Global Enable
option is set to Disabled.
If your system stops responding, this watchdog timer aids in the recovery
of your operating system. When this field is set to Enabled, the operating
system is allowed to initialize the timer. When is set to Disabled (the
default), the timer will have no effect on the system.
25