System Board Shroud - Dell PowerEdge R410 Hardware Owner's Manual

Figure 3-14. Removing or Installing a USB Memory Key
1 USB memory key

System Board Shroud

The system board shroud covers the processor, heat sink, memory modules,
and system battery and provides air flow to these components. Airflow is
facilitated by the cooling fan modules, which are positions directly behind the
system board shroud.
Removing the System Board Shroud
WARNING:
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Open the system. See "Opening and Closing the System" on page 82.
2 Locate the two shroud tabs with blue dots between the fan assemblies. See
Figure 3-15.
1
2
Only trained service technicians are authorized to remove the system
2 USB memory key connector
Installing System Components
105