Dell PowerEdge R410 Hardware Owner's Manual page 11

Item Indicator, Button, or
Connector
2 NMI button
3 Video connector
4 LCD menu buttons
5 LED or LCD panel
Icon Description
Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
Connects a monitor to the system.
Allows you to navigate the control panel
LCD menu.
NOTE:
your system may have either LED
diagnostic indicators or an LCD panel.
LED panel: The four diagnostic
indicator lights display error codes
during system startup. See "Diagnostic
Lights (Optional)" on page 21.
LCD panel: Provides system ID, status
information, and system error messages.
The LCD lights during normal system
operation. Both the systems management
software and the identification buttons
located on the front and back of the
system can cause the LCD to flash blue
to identify a particular system.
The LCD lights amber when the system
needs attention, and the LCD panel
displays an error code followed by
descriptive text.
NOTE:
AC power and an error has been
detected, the LCD lights amber
regardless of whether the system
has been powered on.
Depending on the configuration,
If the system is connected to
About Your System
11