Dell PowerEdge R410 Hardware Owner's Manual page 33

Table 1-2. LCD Status Messages (Optional) (continued)
Code Text
E201A SuperIO
failure. Power
cycle AC.
E201B Keyboard
Controller
error. Power
cycle AC.
E201C SMI
initialization
failure. Power
cycle AC.
E201D Shutdown test
failure. Power
cycle AC.
E201E POST memory
test failure.
Check DIMMs.
E2020 CPU
configuration
failure. Check
screen
message.
Causes
SIO failure.
Keyboard controller
failure.
System management
interrupt (SMI)
initialization failure.
BIOS shutdown test
failure.
BIOS POST memory test
failure.
Processor configuration
failure.
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 167.
Remove AC power to the
system for 10 seconds and
restart the system.If the
problem persists,
see "Getting Help" on
page 167.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 167.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 167.
See "Troubleshooting
System Memory" on
page 152.
If the problem persists,
see "Getting Help" on
page 167.
Check screen for specific
error messages.
See "Troubleshooting the
Microprocessors" on
page 160.
About Your System
33