Opening And Closing The System - Dell PowerEdge R410 Hardware Owner's Manual

Opening and Closing the System

WARNING:
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
WARNING:
To avoid injury, do not attempt to lift the system by yourself.
Opening the System
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and peripherals.
2 Rotate the latch release lock counter clockwise to the unlocked position.
See Figure 3-3.
3 Grasp the cover on both sides while pressing your thumbs on latch release
lock and the indent, carefully slide the cover back, and lift it away from the
system. See Figure 3-3.
82
Installing System Components
Only trained service technicians are authorized to remove the system
Whenever you need to lift the system, get others to assist you.