Analog Devices AD9380 Manual page 35

Hex Read/Write
Address or Read-Only
0xBE Read
0xBF Read
0xC0 Read
0xC1 Read
0xC2 Read
0xC3 Read
0xC4 Read
0xC5 Rea
0xC6 Read
0xC7 Read
0xC8
Read
0xC9 Read
www.BDTIC.com/ADI
0xCA Read
0xCB Read
0xCC Read
0xCD Read
0xCE Read
0xCF Read
0xD0 Read
0xD1 Read
0xD2 Read
0xD3 Read
0xD4 Read
0xD5 Read
0xD6 Read
0xD7 Read
0xD8 Read
0xD9 Read
0xDA Read
0xDB Read
0xDC Read
0xDD Read
0xDE Read
0xDF Read
0xE0 Read
0xE1 Read
0xE2 Read
0xE3 Read
0xE4 Read
Default
Bits Value Register Name
[7:0]
[6:0] New Data Flags
[7:0] Audio Content
Protection Packet
(ACP) Type
[7:0] ACP Packet Byte 0
[7:0] ACP_PB1
[7:0] ACP_PB2
[7:0] ACP_PB3
[7:0] ACP_PB4
[7:0] ACP_PB5
[6:0] NDF
7 ISRC1 Continued
6 ISRC1 Valid
[2:0] ISRC1 Status
[7:0] ISRC1 Packet Byte 0
[7:0] ISRC1_PB1
[7:0] ISRC1_PB2
[7:0] ISRC1_PB3
[7:0] ISRC1_PB4
[7:0] ISRC1_PB5
[6:0] NDF
[7:0] ISRC1_PB6
[7:0] ISRC1_PB7
[7:0] ISRC1_PB8
[7:0] ISRC1_PB9
[7:0] ISRC1_PB10
[7:0] ISRC1_PB11
[7:0] ISRC1_PB12
[6:0] NDF
[7:0] ISRC1_PB13
[7:0] ISRC1_PB14
[7:0] ISRC1_PB15
[7:0] ISRC1_PB16
[7:0] ISRC2 Packet Byte 0
[7:0] ISRC2_PB1
[7:0] ISRC2_PB2
[6:0] New Data Flags
[7:0] ISRC2_PB3
[7:0] ISRC2_PB4
[7:0] ISRC2_PB5
[7:0] ISRC2_PB6
[7:0] ISRC2_PB7
Description
Reserved.
New data flags (see 0x87).
Audio content protection packet (ACP) type.
0x00 = Generic audio.
0x01 = IEC 60958-identified audio.
0x02 = DVD-audio.
0x03 = reserved for super audio CD (SACD).
0x04 to 0xFF reserved.
ACP Packet Byte 0 (ACP_PB0).
ACP_PB1.
ACP_PB2.
ACP_PB3.
ACP_PB4.
ACP_PB5.
New data flags (see 0x87).
International standard recording code (ISRC1) continued—This
indicates an ISRC2 packet is being transmitted.
0 = ISRC1 status bits and packet bytes (PBs) not valid.
1 = ISRC1 status bits and PBs valid.
001 = starting position.
010 = intermediate position.
100 = final position.
ISRC1 Packet Byte 0 (ISRC1_PB0).
ISRC1_PB1.
ISRC1_PB2.
ISRC1_PB3.
ISRC1_PB4.
ISRC1_PB5.
New data flags (see Register 0x87).
ISRC1_PB6.
ISRC1_PB7.
ISRC1_PB8.
ISRC1_PB9.
ISRC1_PB10.
ISRC1_PB11.
ISRC1_PB12.
New data flags (see 0x87).
ISRC1_PB13.
ISRC1_PB14.
ISRC1_PB15.
ISRC1_PB16.
ISRC2 Packet Byte 0 (ISRC2_PB0)—This is transmitted only when
the ISRC continue bit (Register 0xC8, Bit 7) is set to 1.
ISRC2_PB1.
ISRC2_PB2.
New data flags (see Register 0x87).
ISRC2_PB3.
ISRC2_PB4.
ISRC2_PB5.
ISRC2_PB6.
ISRC2_PB7.
Rev. 0 | Page 35 of 60
AD9380