Moving Parts - Risks Of Injuries; Technical Specifications - Gastroback DESIGN MULTI JUICER DIGITAL PRO Operating Instructions Manual

ately. If in doubt, check the used processing system for leakage and
overflow, before operating the appliance again.
• Do not overfill the containers of the appliance (juice jug, pulp con-
tainer, mixing jug, grinding cup). If required, empty the container in
time. Otherwise, liquids could run out, causing risk of short circuit and
electric shock.
• Do not place or immerse the motor base or power cord in water or
any other liquid. DO NOT spill or drip any liquids on the motor base
or the power cord to avoid risk of fire and electric shock. When parts
of the appliance are leaking during operation and/or liquids accu-
mulate under the motor base or run down on the exterior of the appli-
ance, immediately unplug the appliance. Refer to the instructions in
chapter 'Solving Problems'. Mixing system: If possible, the mixing jug
should not be filled while standing on the motor base. Remove the
glass jugs from the motor base for filling and taking out food.
MOVING PARTS – RISKS OF INJURIES
• Before opening the used processing system for removing food that is
sticking to the inner surfaces or taking out your food, and before disas-
sembling any parts: always switch OFF the appliance (selection dial
to "OFF", power switch to "O") and unplug the appliance.
• After switching off, the motor may still turn for a moment. Always wait
until the motor stops completely before disassembling or moving the
appliance.
• Do not attempt to corrupt the safety interlocks of the appliance to
avoid severe injuries and damage due to vigorously moving, sharp
knives. Do not handle the appliance or any part of it with violence.
• DO NOT insert your fingers or any foreign objects (e.g. cooking
utensils, clothes, brushes) into the feed chute or pulp guttering of the
juicing system, or into the mixing jug or while the processing system
(juicer or mixing jug) is placed on the motor base and the appliance
is connected to the power supply. For juicing, do not attempt to use
any other utensils but the provided food pusher to push down the food
in the feed chute.
78
• During operation, do not hold your face over the appliance (e.g. feed
chute, ingredients opening in the mixer lid). Do not operate the mixing
system without the lid closed securely. Liquids or hard parts of the
processed foods could be hurled out. The knives of the juicing sieve
and blade assemblies are very sharp. Close supervision is necessary
while handling these parts to avoid injuries. Always grasp the juicing
sieve by the rim or drive coupling and the blade assemblies by the
collar. Handle these parts with care and without violation. Use a fine
nylon brush for cleaning. For storage, always assemble the juicing
sieve and blade assemblies with the appropriate processing system
and cover with the designated lids, to avoid touching the knives unin-
tentionally.

TECHNICAL SPECIFICATIONS

Item - No. and Model: 40153 Design Multi Juicer Digital Pro
Power supply: 220 - 240 V ~ , 50 - 60 Hz
Power consumption: 1500 W
Length of power cord:
approx. 110 cm
Weight (motor base):
approx. 3.0 kg
Dimensions (motor base): approx. 200 x 211 x 228 mm (width x depth x height)
Capacity, pulp container: max. 2000 ml (upper rim of the handling groove)
Capacity, juice container:
max. 1250 ml
Capacity, mixing jug
250 ml to 1500 ml
Capacity, grinding cup approx. 150 g
Certification:
These specifications may change without notice.
79