Moving Parts - Risks Of Injuries; Technical Specifications - Gastroback DESIGN MULTI JUICER DIGITAL Operating Instructions Manual

Hide thumbs Also See for DESIGN MULTI JUICER DIGITAL:
Table of Contents

Advertisement

Available languages

Available languages

MOVING PARTS – RISKS OF INJURIES
• Before opening the juicing system for removing obstacles, and before
disassembling any parts: always switch OFF the appliance (selection
dial to "OFF", power switch to "O") and unplug the appliance.
• After switching off, the motor may still turn for a moment. Always wait
until the motor stops completely before disassembling or moving the
appliance.
• Do not attempt to corrupt the safety interlocks of the appliance to
avoid severe injuries and damage due to vigorously moving, sharp
knives. Do not handle the appliance or any part of it with violence.
• DO NOT insert your fingers or any foreign objects (e.g. cooking uten-
sils, clothes, brushes) into the feed chute or pulp spout of the juicing
system, while the juicing system (juicer or glass jug) is placed on the
motor base and the appliance is connected to the power supply. For
juicing, do not attempt to use any other utensils but the provided food
pusher to push down the food in the feed chute.
• During operation, do not hold your face over the appliance (e.g. feed
chute. Liquids or hard parts of the processed foods could be hurled
out. The knives of the juicing sieve are very sharp. Close supervision
is necessary while handling the juicing sieve to avoid injuries. Always
grasp the juicing sieve by the rim or drive coupling. Handle the jui-
cing sieve with care and without violation. Use a fine nylon brush
for cleaning. For storage, always assemble the juicing system on the
appliance to avoid touching the knives unintentionally.
54

TECHNICAL SPECIFICATIONS

Model and Item - No.:
40151 Design Multi Juicer Digital
Power supply:
220 - 240 V ~ , 50 - 60 Hz
Power consumption:
1500 W
Length of power cord:
approx. 110 cm
Weight (motor base):
approx. 3.0 kg
Dimensions (motor base):
approx. 200 x 211 x 228 mm (width x depth x height)
Capacity, pulp container:
max. 2000 ml (upper rim of the handling groove)
Capacity, juice container:
max. 1250 ml
Certification:
These specifications may change without notice.
55

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

40151

Table of Contents