Opera Prima Slim Installation And User Manual page 75

5.21 COOKING TIMER
The timers for the cooking zones can be used to automatically turn off a cooking zone when
the set time expires, which can be adjusted within a range of 1 minute to 1 hour and 59
minutes. During the operating time, the cooking zone can be used normally, and the cooking
level can be changed. Each cooking zone is equipped with an independent timer, meaning
you can set the time for each individual cooking zone.
1. Prerequisite: Ensure that the pot is
positioned on the corresponding cooking
zone and that a cooking level has been set.
2. Press the timer display.
3. Use the Plus and Minus buttons to set the
desired time. The timer symbol for the
cooking zone will light up.
Left position: hours
Middle position: every 10 minutes
Right position: every minute
After a few seconds, the timer will start counting down. When it reaches 0, it emits a beep, the
display shows "000," and the cooking zone turns off. Press any button to deactivate the beep.
NOTE
• Repeat steps 2 and 3 to program the cooking timer for another cooking zone.
• To check the time that has lapsed press the timer display (as a key). The setting
displayed can be read and changed.
• To stop the timer, select the cooking zone and press the Minus key to delete the
remaining time.
• If several cooking zones have been programmed with the automatic switch-off
function, the timer display will always show the cooking zone with the shortest
time left.
5.22 STANDALONE TIMER
The timer can be set within a range of 1 minute to 9 hours and 59 minutes.
1. Turn on the cooktop without selecting any
cooking zone. The timer display will show
"---."
2. Touch the timer display. Use the Plus or
Minus buttons to set the desired time.
Wait for about 5 seconds without
performing any other actions. The timer
will start counting down.
3. When the set time expires, a beep will
sound, which can be turned off by pressing
any button except the ON/OFF button of
the cooktop.
1.
2.
3.
1.
2.
3.
PRIMA SLIM | 75