Opera Prima Slim Installation And User Manual page 72

• First touch: Set the level according to the part of the slider touched. The LEDs will light
up to indicate the selected level.
Sliding your finger on the slider: To the right: Increase the power level. To the left:
decrease the power level.
• Activation: Once you remove your finger from the slider, the cooking zone will start
operating at the set level.
• If you press and hold a specific point on the slider for at least 3 seconds, automatic
cooking is activated (see "Automatic Quick Heating").
5.14 TURNING OFF THE COOKING ZONES
• Make sure the selected plate is activated.
• By touching the slider at the beginning, you can set the power setting to "0." A short
beep will confirm that the position has been set to OFF.
5.15 TURNING OFF THE COOKTOP
• The cooktop turns off by pressing the ON/OFF button.
• The beep and all indicators will turn off, except for those of the still-hot plates, which
display the heating symbol "H" to indicate residual heat.
5.16 PAUSE FUNCTION
The cooking process can be briefly interrupted using the Pause function, suitable for
situations like answering the phone. This function must be released to resume cooking at
the same power level. If a timer has been set, the program will pause and then continue. For
safety reasons, the Pause function is available for only 10 minutes.
1. Pots and pans must be placed on the
cooking zones with the set power levels.
2. To activate the pause, press the pause button
"II." Instead of the selected power settings,
the pause symbol "II" will light up.
3. To end the pause, press the pause button "II"
again and then any other button (except the
ON/OFF button) within 10 seconds; otherwise,
the Pause function will remain activated.
WARNING
For models IFU038A0, IFU058A0, IFU078A0, IFU088A0, the pause symbol "II" also
appears on the hood display when the pause is active, and the hood level (if greater
than 0) is reduced to level 1.
72 | ASPIRATION HOB
1.
2.
3.
10 sec.