1.3 EXPLANATION OF SYMBOLS AND INDICATIONS
This appliance has been manufactured using the most advanced technology. However,
it is important to note that the use of machines involves risks that cannot be completely
eliminated.
To ensure adequate safety for the user, specific safety instructions are provided. These
instructions are highlighted in the following sections of the manual. Adhering to these
indications is essential for the safe operation of the appliance.
WARNING
This indication highlights different levels of risk. It may indicate an imminent
threat that could cause death or very serious injuries, a potentially dangerous
situation with similar consequences, or a less severe risk that could result in minor
injuries or damage to the appliance.
NOTE
Note to be observed to facilitate the use of the appliance.
WARNING OF ELECTRICITY! RISK OF DEATH!
Components under voltage have been installed near this symbol. Covers bearing
this writing may only be removed by a qualified and certified electrician.
WARNING! HOT SURFACES!
This symbol has been applied to surfaces that can overheat. There is a risk of
severe burns or scalds. Surfaces may still be hot even after the appliance has been
turned off.
COMPLY WITH REGULATIONS FOR HANDLING COMPONENTS AND MODULES
SENSITIVE TO ELECTROSTATIC DISCHARGES (ESD)
Components and modules at risk of electrostatic discharges are located behind
covers marked with the adjacent symbol. Never touch the power sockets, ribbon
conductors, or pins of components. Only qualified personnel familiar with the
phenomenon of electrostatic discharges are authorized to perform technical
interventions.
ASPIRATION MODE
This symbol indicates the aspiration mode, where air is extracted and discharged
outside through an exhaust duct.
RECIRCULATION MODE
This symbol indicates the recirculation mode, where air is filtered and recirculated
inside the environment without external exhaust.
PRIMA SLIM | 51
Need help?
Do you have a question about the Prima Slim and is the answer not in the manual?