Installation; Storage And Disposal; Preparation; Mounting The Sensor - Pepperl+Fuchs SmartRunner Manual

SmartRunner Detector

Installation

3 Installation
3.1

Storage and Disposal

Keep the original packaging. Always store and transport the device in the original packaging.
Store the device in a clean and dry environment. The permitted ambient conditions must be
considered, see datasheet.
The device, built-in components, packaging, and any batteries contained within
must be disposed in compliance with the applicable laws and guidelines
of the respective country.
3.2

Preparation

Unpacking the Device
1.
Check the packaging and contents for damage.
In the event of damage, inform the shipping company and notify the supplier.
2.
Check the package contents against your order and the shipping documents to ensure that all
items are present and correct.
Should you have any questions, direct them to Pepperl+Fuchs.
3.
Retain the original packaging in case the device is to be stored or shipped again at a later date.
3.3

Mounting the Sensor

Note
Mounting an optical device
• Do not aim the sensor at the sun.
• Protect the sensor from direct long-term exposure to sun.
• Prevent condensation from forming by not exposing the sensor to any major fluctuations
in temperature.
• Do not expose the sensor to the effects of any aggressive chemicals.
• Keep the lenses and reflector of the device clean. Clean with a soft cloth, using standard
commercial glass cleaner if necessary.
We recommend to clean the optical surface and to check screw fittings and electrical
connections at regular intervals.
The operating distance differs depending on the sensor. The correct operating distance can be
found in the datasheet for the sensor to be installed.
The following two figures show the orientation of the sensor under extraneous light:
14