Around the Bottom of the System
The bottom of the NEC Versa offers the features shown next. Features are described after the
figure.
A – Memory Module Bay
B – Battery Release Latch
C – System Feet
T
Memory Module Bay — Stores the system's memory module.
T
Battery Bay Release Latch — Allows you to release and remove the system's main
battery.
T
System Feet — Heightens the system to allow proper ventilation.
T
Main Battery — Supplies power when the system is not connected to an AC power
source.
T
Vents — Allows your system to cool properly and maintain a safe operating
temperature.
T
Maximum Life Battery Connector — Attach the optional Maximum Life Battery to this
connector.
Internal Components
Review the following sections for a description of the system's internal hardware.
Battery Pack
The system uses a rechargeable Lithium-Ion (Li-Ion) battery as its transient power source. The
battery pack installs in the compartment on the bottom of the NEC Versa.
1-10 System Overview
Bottom features
D – Main Battery
E – Vents
F – Maximum Life Battery Connector
Always keep the vents unobstructed to allow proper system cooling.