Table of Contents
Advertisement
5.
Select a setting as follows.
Press
setting.
Press
ords the change, exits the window, and returns you to
the parameter window.
6.
Repeat steps 3, 4, and 5 to set parameters in the same
parameter menu.
When you are through viewing and setting parameters
within the parameter menu, press
any parameter changes, close the window, and return to
the Auto Setup Summary screen.
To return to the summary screen without saving
changes, press
When you are through viewing or changing parameters,
7.
press
plays a list of options.
8.
Use to select "Exit and Save Changes" and press
Enter
confirmation that you wish to exit.
Press
9.
reboots with the saved changes.
SYSTEM PARAMETER OPTIONS
This section provides descriptions of the available
parameter options in Auto Setup. Refer to the following
table for a quick reference list of parameters and their
factory default settings in the mobile mode.
You can select default nonvolatile memory (CMOS)
settings as an option in Auto Setup if you have trouble
setting specific parameters.
5-6 Using Auto Setup
or
to position your cursor on the parameter
Enter
to select the new setting. Auto Setup rec-
Esc
.
X
to select Exit in the menu bar. The screen dis-
. The screen displays a prompt requesting
to confirm your selection. The system
Enter
or
to record
Enter
C
Advertisement
Table of Contents
