Using The Save To File (Stf) Feature - NEC VERSA 6220 User Manual

T
High Perform — Provides best performance and good battery life. Use
while on the road or traveling short distances.
T
Custom — Lets you decide! Set power management levels according to
your own needs and present environment.
T
Off — Works well in an office environment while powering your NEC
Versa with AC power.

Using the Save to File (STF) Feature

STF protects the integrity of your working files. For example, if you are
called away from your NEC Versa and Suspend mode is selected with auto
Save to File active, your system automatically goes into Suspend mode.
After 30 minutes, if you don't return, your working environment is saved to
a special file on your hard disk.
To configure your NEC Versa's STF feature:
Access the BIOS setup utility.
1.
2. Select Power Management from the Setup Main Menu.
3. Move the cursor down and highlight Suspend Mode.
Press the
4.
Save the settings and exit BIOS Setup.
5.
There are two ways to invoke the NEC Versa's STF feature, one automatic
and one manual.
T
After 30 minutes of inactivity, your NEC Versa automatically invokes
STF, provided you have configured STF in the BIOS Setup utility.
T
You can manually invoke STF by pressing
before you leave your NEC Versa.
NOTE
maining in the system, the NEC Versa automatically performs a
Save to File.
3-12 Using BIOS Setup
key and select STF.
PgUp
When the status bar reads that there is only 4% power re-
simultaneously,
Fn Suspend