NEC VERSA 6220 User Manual page 109

Open the right-most port cover on the back of the system.
2.
Attach the 15-pin cable connector to the monitor port on the system.
3.
Secure the cable connection with the screws provided.
4. Connect the monitor power cable and plug it into a properly grounded
wall outlet.
5. Follow any setup instructions in the monitor's user's guide.
Turn on power to the monitor.
6.
Press the Suspend button to resume Active mode or power on the NEC
7.
Versa.
Press Fn-F3
display, and TV Out.
4-42 Using Your NEC Versa
to toggle between the LCD, CRT, simultaneous CRT/LCD
Connecting a monitor