NEC VERSA 6220 User Manual page 63

– Hard Disk Timeout — Allows you to select the amount of time
before your hard disk shuts down.
– Video Timeout — Allows you to select the amount of time before
your video shuts down.
– Peripheral Timeout — Lets you choose the amount of time be-
fore your peripherals are controlled by power management.
– Audio Device Timeout — Selects the amount of time before your
audio device shuts down.
– Standby Timeout — Allows you to select the system standby
timeout period.
– Auto Suspend Timeout — Defines how much time elapses before
the system automatically enters Suspend Mode.
T
Suspend Option — Allows you to specify either Suspend or Save to File
(STF) as the default power management mode. In Suspend, after a
specified amount of inactivity, your NEC Versa shuts down all devices
as you specified in Power Management Setup or applies default timeouts.
All your data is automatically recovered from where you left off when
you Resume.
T
Automatic STF — After 30 minutes in Suspend mode the current file is
automatically saved to a special file on the hard disk and the system
shuts down. To resume, you must press the power button. The system
reads the saved file and sets up your system accordingly.
If Auto Save to File is set to Off and HDPREPEZ is present, pressing the
key combination puts the system into Save to File mode.
Fn-Suspend
T
Panel Backlight — Lets you select the LCD screen backlight intensity.
T
Suspend Warning Tone — Specifies whether the system warning tone
sounds when Suspend mode starts. It is best to keep this option enabled.
T
Modem Ring Resume — Lets you choose whether the system resumes
automatically when an external modem receives a ring signal.
T
Wake Up from Suspend Alarm/Resume Alarm Time — Lets you set a
resume time from Suspend mode.
Using BIOS Setup 3-9