NEC VERSA 6220 User Manual page 85

T
Card Socket Services (SSCBT1.SYS)
This driver manages the card socket services on your system.
T
Card Services (CS.SYS)
This driver manages competition for system resources and manages
adapter and card resources and configuration.
T
Resource Allocation Utility (CSALLOC.EXE)
CSALLOC is a DOS utility that scans the system for available memory,
I/O port, and IRQ resources, updates the file CSALLOC.INI with this
information, and then displays the list of available resources that Card
Services can use. In addition, keywords can be added to CSALLOC.INI
to force CSALLOC to exclude resources from being scanned or include
resources that are not detectable (due to security features or hardware
design). Other keywords let you reserve resources that may be needed by
a particular PC card or other system component.
T
IDE/ATA Support (ATADRV.EXE)
ATADRV.EXE is a block device driver that supports ATA Type II
Flash Disk or ATA Type III Hard Disk PC cards. The ATAINIT.EXE
utility places a hard disk partition table onto a blank ATA drive.
T
SRAM Driver (MTSRAM.EXE)
MTSRAM is a driver that supports SRAM cards. This file is remarked
out to save memory.
T
Memory Technology driver (MTDDRV.EXE)
This component must be installed to support Flash Memory cards. It
works in conjunction with card-specific MTDs to support a wide variety
of Flash Memory cards. It also supports SRAM cards (providing
MTSRAM.EXE is also installed) and allows sharing of drive letters be-
tween the different types of memory cards (Flash, SRAM, and ATA).
T
Card Identification (CARDID.SYS)
This client device driver detects the insertion and removal of PC cards,
automatically determines the card type upon insertion, and then config-
ures the card/slot adapter.
4-18 Using Your NEC Versa