NEC VERSA 6220 User Manual page 171

How can I change my video drivers?
In Windows 95 and Windows NT, press Start, Settings, and Control Panel. In
the Control Panel, double click the Display icon. Click the Settings tab. Next, click Ad-
vanced Properties and press "Change." Click show all devices from the Select Device
screen. Find the video driver you need, or insert a diskette or CD into the appropriate
drive. Click on "Have Disk."
PC CARDS
In which slots do my PC cards go?
Your PC cards can go into either slot if they are NEC-approved cards. Other
software may not support the use of both slots. Type III cards only fit in one slot (slot 0).
Is there any instance when a modem or network card is only supported in
one slot?
This could be true in cases where the PC card firmware is being upgraded. Read
the release notes that accompany the upgrade.
What precautions should be taken when running NEC PC card drivers with
MemMaker?
You may experience some difficulty when running with some PC card drivers
loaded in the upper memory. You may have to move these drivers back to lower memory.
D-2 Questions and Answers