Start-Up Problems; Post Error Messages - NEC VERSA 6220 User Manual

START-UP PROBLEMS

The system displays an invalid configuration error message at power on
when there are the following conditions:
T
the current configuration information doesn't match configuration infor-
mation stored in Auto Setup, such as when an internal option is added.
T
the system loses configuration information.
If either condition is true, the system displays an "invalid configuration in-
formation" message.
To continue start-up procedures, press
current system parameters.
If an error message appears before the operating system starts, look up the
error message in the following table. Follow the instructions. If you see other
error messages, the hardware might need repair.
NOTE
vices, it cannot display on either the LCD or a CRT. The system
warns you by beeping.

POST Error Messages

The NEC Versa 6200 Series computer has a built-in checking program that
automatically tests its components when you turn the system power on. This
diagnostic test is called the Power-On Self-Test (POST). If the system finds a
problem during the POST, the system displays an error message or emits a
series of beep signals. If this happens, follow the instructions in the POST
Error Messages table or the Beep Code table, as appropriate.
When the NEC Versa detects an error related to display de-
and run the Setup utility to set
F2
Solving Problems 7-3