Keyboard And Switch Settings - NEC Versa LXi Series Service And Reference Manual

Keyboard and Switch Settings

Use the following steps to remove the keyboard and access the switch settings.
1. Turn the system over and open the LCD panel.
Locate the two keyboard retainers, press on and slide each one towards the outside edge of
2.
the system, and remove them.
Gently lift up the edge of the keyboard nearest the LCD and slide the keyboard toward the
3.
LCD screen to release the tabs that secure it.
Disconnect the keyboard cable from connector P6 on the main board and remove the
4.
keyboard.
Removing the keyboard retainers
Lifting the keyboard
Disassembly and Reassembly 3-9