Start-Up Problems - NEC VERSA 6060 User Manual

START-UP PROBLEMS

The system displays an invalid configuration error message at power on
when there are the following conditions:
T
the current configuration information doesn't match configuration infor-
mation stored in Auto Setup, such as when an internal option is added.
T
the system loses configuration information.
If either condition is true, the system displays an "invalid configuration in-
formation" message.
To continue start-up procedures, press
current system parameters.
If an error message appears before the operating system starts, look up the
error message in the following table. Follow the instructions. If you see other
error messages, the hardware might need repair.
NOTE
vices, it cannot display on either the LCD or a CRT. The system
warns you by beeping.
When the NEC Versa detects an error related to display de-
and run the Setup utility to set
F2
Solving Problems 7-3