Using The Restore Cd - NEC VERSA 6060 User Manual

USING THE RESTORE CD

If you determine that you need to restore your system to its initial installa-
tion state, follow the instructions given here.
Only use the Restore CD as a last resort. Check your user's manual
for information about solving problems before using the CD. The re-
store CD provides two options that either remove or replace existing
system files. This will result in data loss.
Use the Restore CD ( Windows 95 and Windows for Workgroups) as fol-
lows:
Check the Restore CD title and make sure that it is the correct CD for
1.
your operating system and NEC Versa computer.
Put the Restore CD into the CD-ROM reader tray and close the reader
2.
door.
Reboot your computer.
3.
Press the cursor arrows to select the restore procedure that you need to
4.
use.
Choose your restore option carefully to prevent losing data and
applications installed on your system.
The choices are as follows:
T
Selective Restore — does not format your hard drive, but DOES re-
place files that you specify.
T
Full Restore — formats your hard drive and then performs the file re-
store procedure. This option REMOVES all your applications and file
data from your system.
7-6 Solving Problems
! CAUTION
! CAUTION