NEC VERSA 6060 User Manual page 91

Check that both the NEC Versa and the device power are off.
1.
Open the port cover on the back of the system and locate the serial port.
2.
Align and connect the 9-pin connector with the serial port on the system.
3.
Secure the connection with the screws provided.
Align and connect the other end of the cable to the appropriate port on
4.
the device. Secure the connections with the screws provided.
Connect the power cable to the device and a properly grounded wall out-
5.
let.
Turn on power to the system and the device.
6.
NOTE
printer guide for instructions.
4-30 Using Your NEC Versa
Make sure your printer is online before trying to print. See the
Connecting a serial device