Versaglide Tips; Nec Versabay Ii - NEC VERSA 6060 User Manual

The options let you control the size and color of the cursor, the cursor speed,
the accepted double-click speed, and selection button orientation. Use the
NEC VersaGlide online help button for details about configuring your Ver-
saGlide.

VersaGlide Tips

Follow these basic ergonomic tips while working:
T
Use a light touch on the VersaGlide surface.
T
Set up the NEC Versa with your keyboard and VersaGlide at a
comfortable height. Keep your forearms parallel to the floor. Your wrists
should be relaxed and straight.
T
While using the keyboard and VersaGlide, keep your shoulders and arms
as relaxed as possible.
T
Take regular breaks from the computer to rest your eyes. Perform
stretching exercises to relax your fingers, hands, wrists, forearms, and
shoulders.
See Appendix A, "Setting Up a Healthy Work Environment," for more
information.

NEC VERSABAY II

The NEC VersaBay II is the drive bay located below the VersaGlide. Your
NEC Versa system ships with a standard 3.5 inch, 1.44-MB diskette drive
or SuperDisk LS-120 drive installed in the bay. However, if you choose, you
can remove the drive and install the 20X CD-ROM reader that also ships
with your system.
Your NEC VersaBay II will support warm swapping of the diskette drive,
SuperDisk LS-120 drive and CD-ROM reader. Warm Swapping allows you
to replace devices while your system is in Suspend mode. You do not have to
reboot your system to reconfigure for the new device. To warm swap place
the system in Suspend mode, by pressing the Suspend/Resume (S/R) button.
Then follow the instructions to replace either the diskette drive or CD-ROM
reader.
4-6 Using Your NEC Versa