NEC VERSA 6060 User Manual page 100

Use the arrow keys to highlight the "Display BIOS Version" option on
9.
the Main Menu. Use this option to check the currently installed BIOS
version and the version of the new replacement BIOS.
Press any key to return to the Main Menu.
Highlight the "Install New BIOS" option and press Enter.
10.
Press Y, then press Enter. After a brief pause, a message appears tell-
11.
ing you to remove the diskette in drive A.
Remove the diskette and press any key to continue. The utility updates
12.
the BIOS. You will see a message indicating that the update is now in
progress.
Next, you will see the following message,
13. After reading this message, power off your computer. The next time
you power on, you will see the following message during the Power On
Self Test (POST).
This message simply means the previous CMOS RAM value is differ-
ent from the current CMOS RAM value.
Press the F1 key to enter the Setup utility.
14.
Use the arrow keys to highlight "Auto Configuration with Defaults."
15.
Press Enter.
16.
Press Y, then press Enter.
17.
Highlight "Save Settings and Exit" and press Enter.
18.
Press Enter.
19.
The system reboots automatically. You now have the latest NEC Versa BIOS revision level
for your NEC Versa 6060 Series computer.
Your system has been updated.
To complete the flashing procedure you should
power off your system, this insures proper
application operation on the next power cycle.
CMOS Checksum Bad
RUN SETUP
Press F1 to Resume.
Using Your NEC Versa 4-39