Determining Battery Status - NEC VERSA 6060 User Manual

V6060 series
Hide thumbs Also See for VERSA 6060:
Table of Contents

Advertisement

When battery power gets low, do either of the following:
T
Press the suspend button to put your system in Suspend mode, remove
the battery pack, and replace it with a fully charged Li-Ion battery.
T
Leave the battery pack in the system and connect your NEC Versa to the
AC adapter and a wall outlet. The battery recharges in approximately 2
hours.
You can also buy an optional NEC Versa battery charger to quickly charge
your battery. See the online NEC Versa Accessories and Solutions Catalog.
NOTE
Versa battery type. Different NEC Versa models require different
batteries and battery chargers.
To prevent accidental battery ignition or explosion, adhere to the
following:
T
Keep the battery away from extreme heat.
T
Keep metal objects away from the battery terminals to prevent
causing a short circuit.
T
Make sure the battery is properly installed in the battery bay.
T
Read the precautions printed on the battery and in the online The
Basics .

Determining Battery Status

You can determine battery status via the battery icon in the status bar dis-
cussed earlier in this chapter. If you have one battery pack installed, one
battery icon appears. If you have two batteries installed, two battery icons
appear.
1-18 Getting Started
Use only the NEC battery charger designed for your NEC
!
WARNING

Advertisement

Table of Contents
loading

Table of Contents