Controls - NEC VERSA 6060 User Manual

Controls

NEC Versa system controls are shown in the following figure. These fea-
tures are described after the figure.
T
LCD Status Bar — A liquid crystal status bar that keeps you informed
of your NEC Versa's current operating status. See a description of icons
in the following section.
T
Power LED
T
Suspend/Resume (S/R) Button — press the S/R button to put the unit
into Suspend mode when you need to be away from your system for a
short period of time and want to return to where you left off. Press the
S/R button again to bring your NEC Versa system out of Suspend mode
and back to where you where before entering Suspend.
Specifically, Suspend mode shuts down all devices in the system while
retaining data and system status. You will find more detailed information
on using Suspend mode in your online NEC Versa 6060 Help Center.
T
Power Button — slide the power button to the right to power on and
power off the computer.
1-4 Getting Started
Lights green when the system is powered on.
Blinks green when the system is in Suspend mode.
Blinks amber to indicate that battery power is low.
Controls