Updating The System Bios - NEC VERSA 6060 User Manual

Updating the System BIOS

Use the following steps to update your NEC Versa system BIOS with the
BIOS Update diskette (BUD). Specifically, the BIOS is the code transmitted
onto your system's microprocessor, or central processing unit (CPU).
NOTE
improvements or fixes to the current system BIOS. Your authorized
NEC dealer, or Technical Support Service representative can help
you determine this.
If you are informed that the default BIOS needs an upgrade, you can receive
a copy of the BUD by contacting the NEC Versa Diskette Fulfillment Center
at (800) 842-6446, or NEC Customer Service and Support (800) 632-4525,
Fax (508) 635-4666. You can also download from NEC's BBS at (508)
635-4706.
You must use only the BIOS upgrade diskette for your specific model.
NOTE
U.S., please contact a local NEC office or dealer in your country.
They will provide you with BIOS upgrades.
1. Check that computer power is off. Turn your NEC Versa system upside
down with the front of the unit (VersaBay II) facing you.
2. Follow the hard disk drive removal procedures listed previously in the
"Hard Disk Drive" section, and remove the hard disk drive.
You only need to update the BIOS if NEC makes significant
If you purchased and are using this computer outside the
Using Your NEC Versa 4-37