How To Use Laplink - NEC VERSA 6060 User Manual

T
Remote Control — gives you access and control over a remote computer.
Activity you perform on a local system, such as keystrokes, file access
and change, and program execution, actually occurs on the remote
system.
T
Chat — provides a way for you to exchange information, instructions, or
other messages with a user at a remote computer.
LapLink software must be loaded on both the sending (local) and receiving
(remote) systems for communication between them to work properly.

How to Use LapLink

Follow these steps to get started using LapLink. Once you have LapLink up
and running, refer to LapLink's online help for more information.
Start the LapLink Traveling software as follows:
1.
T
In Windows for Workgroups, locate and double click the LapLink
group icon. Select LapLink for Windows.
T
In Windows 95, press
locate the LapLink for Windows 95 folder. In the folder, highlight the
LapLink line and press the VersaGlide selection button or tap the
VersaGlide pad once.
If you do not have a port enabled, LapLink prompts you to enable one.
Press
port. Otherwise, press
2. Once your ports are configured, select your communication method by
pressing the appropriate button. The buttons give you the following con-
nection options. (Balloon help displays each button's function.)
T
Connect over cable
T
Connect over wireless
T
Connect over modem
T
Connect over network
T
Connect over dial-up network
Once communication is established between systems, the LapLink win-
dow is displayed.
Start
Yes to do so and follow the on-screen instructions to configure the
.
No
, slide the cursor over to Programs, and
Introducing the Software 2-9