NEC VERSA 6060 User Manual page 58

T
Video Timeout
Allows you to select the amount of time before your video shuts down
when Power Management is set to Custom.
T
Peripheral Timeout
If this feature is On, onboard serial, parallel, diskette or SuperDisk
LS-120 devices are power managed after 2 seconds of inactivity.
T
Audio Device Timeout
If this feature is On, the audio device turns off when no sound device ac-
tivity occurs for 30 seconds.
T
Standby Timeout
You can specify when the system enters Standby mode after total system
inactivity.
T
Auto Suspend Timeout
You can select the system suspend timeout period. If no system activity
has occurred for the specified timeout, the system will enter the selected
Suspend Option.
T
Suspend Option
Suspend mode is the default power management mode. When you select
Suspend, after a specified amount of inactivity, your NEC Versa shuts
down all devices as specified by the user in Setup (or applies default
timeouts). All your data is automatically recovered from where you left
off when you Resume.
T
Auto Save to File (STF)
The system enters STF after 30 minutes in Suspend mode.
T
Panel Backlight
Lets you choose the backlight intensity.
T
Suspend Warning Tone
This parameter lets you enable or disable a warning tone when Suspend
mode starts. It is best to keep this option On.
T
Modem Ring Resume
Lets you choose whether the system resumes automatically when the ex-
ternal serial port modem receives a transmission.
3-10 Using Setup