Table of Contents
Advertisement
When you run a setup.exe program, do not
select and install drivers for any hardware that is
not currently installed on the system. Doing so
can damage the operating system.
5. Follow the prompts in the installation wizard to install the
driver.
6. Repeat steps 1 through 5 for each driver you wish to
install.
7. Restart the computer to ensure that the installation
process completes successfully.
Installing Drivers from a Remote CD
If the computer is connected to a network and set up to access
a shared CD-ROM drive, a System Administrator can install
the optional drivers from the NEC Driver CD in the remote
CD-ROM drive.
The following procedure applies for Windows 95, Windows
98, and Windows NT systems. Differences in the procedure
for each operating system are noted as they occur.
! CAUTION
Configuring the System 3-51
Advertisement
Table of Contents
