NEC POWERMATE 5100 Manual page 86

The Partition Information screen has three options and
lets you select the File Allocation Table (FAT) type you
want to use for the operating system restore:
T
Click Back
T
Click
FAT 16
(current FAT type).
T
Click FAT 32
(available for Windows 95 or Windows 98 systems
only).
Some older software may not work in a Windows 95 or
Windows 98 system configured for FAT 32.
In Windows NT 4.0 systems, the Partition Information
screen does not appear. Instead, the FAT16 Partition
warning appears. This screen is described in the following
paragraph.
8. After you select the FAT type, a warning screen appears
indicating that the system is about to partition and format
your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
T
Click
Back
screen.
T
Click Exit
T
Click Continue
3-38 Configuring the System
to return to the Operating Mode screen.
to select the FAT16 allocation table
to select the FAT32 allocation table
to return to the Partition Information
to terminate the restore process.
to perform FDISK.