Table of Contents
Advertisement
T
Diskette drive
diskette drive. See the documentation that comes with the
drive.
T
IDE device
before installing it. See the documentation that comes with
the device for jumper setting information.
T
CD-ROM drive must be set correctly as the first (master)
or second (slave) device on the IDE channel.
See "Connecting Device Cables" for more information.
Connecting Device Cables
The cables used for installing optional storage devices
include the following:
T
diskette drive signal cable
T
IDE signal cables
T
system power cables.
Riser board cable drive connectors are shown in the
following figure.
remove any termination on the optional
check the jumper settings on the device
Installing Options 5-29
Advertisement
Table of Contents
