Table of Contents
Advertisement
Note:
The inside of the front panel has three
locking tabs, two on the left and right sides and
one in the middle. The panel also has two pop-in
tabs on each side and four slots on the bottom.
2. Press in on the left and right locking tabs and press down
on the middle tab (see the following figure)
3. Align and insert the front panel slots into the metal
chassis tabs.
4. Evenly press the front panel into position until the tabs
lock the panel in place on the chassis.
Replacing the front panel
A – Pop-In Tabs (one not shown) B – Locking Tabs
C – Metal Chassis Tabs D – Front Panel Slots
5. Replace the system unit cover (see "Replacing the
Cover").
Installing Options 5-41
Advertisement
Table of Contents
