NEC POWERMATE 5100 Manual page 169

Riser board cable connectors
A – Modem In (JP2) B – CD Audio In (JP1) C – LAN
D – Diskette Drive E – Secondary IDE (J9) F – Primary IDE (J10)
Use the following table when configuring IDE devices on the
primary and secondary IDE connectors on the riser board.
IDE Connector Configuration
Configuration
1 device (hard drive)
2 devices (hard drive,
CD-ROM)
2 devices (hard drive, hard
drive)
5-30 Installing Options
Primary connector Secondary connector
Master - hard drive Master - none
Slave - none Slave - none
Master - hard drive Master - CD-ROM
Slave - none Slave - none
Master - hard drive Master - hard drive
Slave - none Slave - none