Table of Contents
Advertisement
T
Click
to return to the Operating Mode screen.
Back
T
Click
FAT 16
(current FAT type).
T
Click
FAT 32
(available for Windows 95 or Windows 98 systems
only).
Some older software may not work in a Windows 95 or
Windows 98 system configured for FAT 32.
In Windows NT 4.0 systems, the Partition Information
screen does not appear. Instead, the FAT16 Partition
warning appears. This screen is described in the following
paragraph.
6. After you select the FAT type, a warning screen appears
indicating that the system is about to partition and format
your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
T
Click
to return to the Partition Information
Back
screen.
T
Click
to terminate the restore process.
Exit
T
Click
Continue
7. If you click
Continue
the FAT type you selected and reboots the system. After
the reboot, all partitions are formatted. When all the
partitions have been formatted, the OS loads from the
CD. The Installing Applications screen appears. This
screen also displays the version of Windows OS being
installed.
The drivers and other software components required for
the operating system are also loaded from the CD.
to select the FAT16 allocation table
to select the FAT32 allocation table
to perform FDISK.
, the system performs FDISK using
Configuring the System 3-33
Advertisement
Table of Contents
