Table of Contents
Advertisement
You can obtain the BIOS Recovery program by downloading
it to a diskette from the NEC CSD Bulletin Board System
(BBS), the NEC CSD File Transfer Protocol (FTP) site, or
the NEC CSD website. See Chapter 7 for information on how
to access the files and download them onto a diskette.
! CAUTION
Jumpers are set correctly at the factory for your
configuration.
If your system requires a jumper change, change
only the setting for that condition. Otherwise,
keep the jumpers at their factory settings.
The following figure shows location of the system
configuration jumper (J6C1) on the system board.
Locating the system board jumper
A – System Configuration Jumper (location J6C1)
Configuring the System 3-55
Advertisement
Table of Contents
