Removing The Right And (Only For "Maintenance-Free" Left Inspection Covers - APRILIA SR 50 - 2003 Manual

1
2
6
3
3
REMOVING THE RIGHT AND
LEFT INSPECTION COVERS
Carefully read p. 44 (MAINTENANCE).
NOTE
Handle the painted components with
care and avoid scraping or damaging them.
◆ Position the vehicle on the centre stand,
see p. 43 (POSITIONING THE VEHICLE
ON THE STAND).
◆ Remove the battery/tool kit compartment
cover (1), see p. 25 (BATTERY / TOOL
KIT COMPARTMENT).
◆ Remove the tool kit compartment (2).
◆ Unscrew and remove the two screws (3).
5
4
NOTE
Carry out the following operations
on the side of the inspection cover to be
removed.
◆ Unscrew and remove the screw (4) and
the screw fixing the tail guard (5).
NOTE
Upon reassembly, tighten the screw
fixing the tail guard (5) (with shorter diameter)
in the relevant seat.
◆ Slightly raise the inspection cover (6),
release it from the footrest and withdraw it
sidewards.
NOTE
Upon reassembly, insert the rear
part of the inspection cover in the tail guard,
making the seat (7) match the end of the tail
guard (8).
8
7
6
NOTE
inspection cover must overlap the right
inspection cover.
If both inspection covers have been removed,
reassemble first the right and then the left
cover.
9
In points (9) and (10) the left
use and maintenance SR 50
10
57