Removing The Front Inner Shield - APRILIA SR 50 - 2003 Manual

REMOVING THE FRONT
INNER SHIELD
Carefully read p. 44 (MAINTENANCE).
NOTE
Remove the key from the ignition
switch.
◆ Position the vehicle on the centre stand,
see p. 43 (POSITIONING THE VEHICLE
ON THE STAND).
◆
Unscrew and remove the two screws (1).
◆
Remove the footrest mat (2).
◆ Unscrew and remove the two fastening
screws (3) of the bag hook.
◆ Remove the bag hook (4).
◆ Unscrew and remove the screw (5).
◆
Unscrew and remove the three screws
(6).
◆
Unscrew and remove the screw (7).
CAUTION
Proceed with care.
Do not damage the tangs and/or their seats.
Handle the painted components with care
and avoid scraping or damaging them.
◆ Withdraw and remove the front inner
shield, rotating it toward the saddle.
4
3
6
5
6
3
6
2
7
CAUTION
Tighten the screws to the specified torque
values.
4
3
3
2
1
1
use and maintenance
6
5
6
6
7
1
1
SR 50
59